Product parameters

Binder: acrylic polymer

Color: there are many colors to choose from

Toxicity: none in water

Time interval of the second construction: 8-24 hours

Theoretical paint consumption: 0.6 ~ 1.2 m2 / kg / layer

Dilution: no need to dilute, please mix well before use.

Construction temperature ≥ 5 ℃, air humidity less than 85%.

Color: a variety of color choices.

Product characteristics

♦ It has strong plasticity and changeable shape.

♦ The construction is convenient and arbitrary. With dream paint, the color is multi-end;

♦ After simple polishing, the texture can be produced.

♦ The texture is coarse ore, simple and colorful;

♦ It can repair small defects on the wall.

♦ No bulging, no peeling.

Product application

1. Theoretical dosage: 0.6 – 1.2kg/m2 (depending on different base level)

2. Dilution: it can be diluted with about 5% water.

3. Construction method:

Mixing: if the coating is too thick, dilute it with water and mix it evenly.

Daubing: apply the slurry on the 1 ㎡ square working face with knife or roller, and use construction tools to make their favorite texture effect. In this way, from left to right, from top to bottom, the working face will be finished in order. At the same time of construction, the junction of each working face should be kept moist to prevent dry edge and interface. In order to ensure the continuity of texture, the working belt can be decorated with a small brush.

Wipe the color mask: after the modeling is completed, after it is completely dry, use 240 mesh or 380 mesh sandpaper to slightly polish the relatively tight place, then use dreamlike flash paint or emulsion paint for color wiping construction, and apply one or two times of dust-proof surface coating after it is completely dry.

4. The moisture content of the base surface is ≤ 8%, the construction temperature is ≥ 5 ℃, and the air humidity is required to be less than 85%.