What are the problems in the coating process

2021-04-22 544

Jiangmen water-based paint small series and everybody to talk about what problems exist in the process of coating water-based coatings?

There are cracks

In the process of operation, too low temperature will affect the reaction of paint film, and it is not easy to form at low temperature. Another possibility is that the wood itself is not very good at wood function, and I can't do a good water permeable coating.

Solution: ensure that the construction conditions fully meet the requirements, especially in terms of temperature and humidity; select good information, which is not only loved by consumers, but also ensure the product quality and appearance. The effect of Jiangmen waterborne paint will be greatly improved.

江门水性漆

2. Subsidence

It may be that the water-based paint on the brush is too thick to spread; or it may be that a lot of water has been added to the paint, causing it to be diluted and separated. Otherwise, it can not be swept out of the construction environment. The reason is that the humidity in the air is too high, and the moisture is mixed into the coating, which may also lead to sagging. Very good solution: first of all, we need to supply suitable painting things, such as soft hair and fine brush; strictly add water according to the dilution proportion provided by the coating manufacturer; do not be too sticky or too thin; control the construction environment of the factory to ensure the ventilation and dryness of the room, and add equipment if necessary.

The above is the introduction of Jiangmen waterborne paint. More information is attached to the update of this website.

Origin of the article: Jiangmen waterborne paint http://www.annpu.com


Recommend News